ezSWM Docs

English

Deutsch

English

Deutsch

Appearance

Release Notes ​

[0.31.0] — 2026-06-26 ​

Added ​

  • Layout template editor: port blocks can now be reordered by dragging (grab the handle on the left) or using the up/down buttons in the block header. The new order is saved as part of the template and reflected everywhere the template is used.

[0.30.2] — 2026-06-26 ​

Fixed ​

  • Device library import: ports with poe_mode: pd (Powered Device / PoE input) are no longer incorrectly tagged as PoE PSE ports. Affected the MikroTik CRS326-24G-2S+RM, where ether1 is the switch's own power input and was causing all 24 ports to appear as "PoE Passive 24V".

[0.30.1] — 2026-06-19 ​

Fixed ​

  • LAG groups: the remote-port target dropdown now groups ports by type (copper, then fibre/uplink, then console/management) instead of interleaving each block's first port, so the list reads in physical-panel order.
  • Layout templates: the PoE dropdown no longer fails to open when a block has no PoE type set (caused by an empty-string value incompatible with Nuxt UI v4 USelect); a "None" option is now shown and selected by default.

[0.30.0] — 2026-06-16 ​

Changed ​

  • The app layout now uses the standard Nuxt UI dashboard components. It looks the same, but the sidebar's collapsed state is remembered across reloads, the mobile menu opens as a slide-over, and the header search is left-aligned.

[0.29.2] — 2026-06-18 ​

Fixed ​

  • LAG groups: the remote-port target dropdown no longer lets you pick the same remote port for two local ports, and the ports are now listed in natural order (by unit/index).
  • LAG groups: clicking Save with an empty name now shows the required-field error instead of silently doing nothing.

[0.29.1] — 2026-06-16 ​

Fixed ​

  • Marking a switch as a favourite from the switch list no longer fails silently. The request used the per-site slug without a site context and returned 404; it now uses the switch's unique ID.

[0.29.0] — 2026-06-15 ​

Added ​

  • Language switcher in the header (top right) to toggle between English and German at any time. Your choice is saved to your profile and persists across reloads and devices.

Changed ​

  • The unsaved-changes confirmation now applies consistently to every editing side panel — switch and port editing, bulk port edits, LAG groups, IP allocations and ranges, networks, VLANs and sites. Closing a panel with unsaved changes (clicking outside, Escape, or Cancel) prompts you first.

[0.28.0] — 2026-06-15 ​

Added ​

  • Confirmations (resetting a port, overwriting a LAG connection, leaving a page with unsaved changes) now use in-app dialogs instead of native browser pop-ups.

Fixed ​

  • Resetting a port now fully clears its configuration and connection and severs the link on both ends, instead of leaving a stale back-link on the peer switch.

[0.27.2] — 2026-06-13 ​

Fixed ​

  • Port and LAG actions on a switch reached via a slug URL no longer hit the wrong switch or return 404. Per-site slugs (unique per site, not globally) are now disambiguated using the site context.

[0.27.1] — 2026-06-13 ​

Fixed ​

  • Editing ports and LAG groups on a switch opened via its slug-based URL now works. The endpoints resolve the slug to the switch's ID before applying changes.

[0.27.0] — 2026-06-13 ​

Added ​

  • Switch-list filters (location, role, tags) are now scoped to the current site, each filter has its own reset button, and the filter controls show icons.

[0.26.1] — 2026-06-11 ​

Fixed ​

  • Removed the duplicate "required" asterisk that appeared on some form-field labels.

[0.26.0] — 2026-06-11 ​

Added ​

  • Import devices from the NetBox device library directly in the switch quick-create modal. Selecting a template auto-fills the manufacturer and model (editable; manual changes lock the field).

[0.25.6] — 2026-06-11 ​

Fixed ​

  • Changelog modal now works correctly in the production Docker image. The CHANGELOG files were bundled (after the v0.25.5 path fix) but read from the wrong Nitro storage namespace (assets:server instead of assets:changelog), so the API still returned an empty list.

[0.25.5] — 2026-06-11 ​

Fixed ​

  • Changelog modal now shows release notes in the production Docker image. The CHANGELOG files were not being bundled into the server build because the asset path was resolved relative to the Nuxt app/ directory instead of the project root.

[0.25.4] — 2026-06-11 ​

Fixed ​

  • IP range rows in the subnet detail view now display the address range in a uniform style, matching regular allocation rows. The IP count is now shown as a colour-coded badge matching the range type (DHCP, static, reserved), replacing the previous small grey text.

[0.25.3] — 2026-06-10 ​

Fixed ​

  • IP allocations and ranges no longer appear empty when navigating to a subnet via its slug-based URL. The allocation and range API endpoints now correctly resolve the network slug to its UUID before querying child records.

[0.25.2] — 2026-06-10 ​

Fixed ​

  • Changelog modal no longer shows "unavailable" for logged-in users. The /api/changelog and /api/version-latest endpoints are now public (no auth token required), matching how the changelog is used before and after login.

[0.25.1] — 2026-06-10 ​

Fixed ​

  • Fixed Docker startup crash loop after Prisma 7 upgrade: prisma.config.ts was missing from the runtime image, causing prisma migrate deploy to fail with "datasource.url property is required".

[0.25.0] — 2026-06-10 ​

Changed ​

  • Upgraded Prisma ORM from 6.18 to 7.8. The database engine now uses the better-sqlite3 driver adapter instead of the legacy binary engine. Performance and compatibility are equivalent; no data migration is required.

Breaking change for source builds: The DATABASE_URL in .env is now resolved relative to the repository root (where prisma.config.ts lives), not relative to the prisma/ folder. If you run ezSWM from source and have a custom DATABASE_URL path in .env, update it accordingly. The default path changes from file:../data/db.sqlite to file:./data/db.sqlite. Docker deployments using the pre-built image are not affected.

[0.24.2] — 2026-06-10 ​

Fixed ​

  • Removing a tag from a switch in the edit form now works correctly. Previously the tag was not removed when saved if it was the last tag on the switch.

[0.24.1] — 2026-06-10 ​

Fixed ​

  • Backup export and restore now work correctly. Previously, restoring a backup always failed because sites were missing from the exported file, causing a database error on import.

[0.24.0] — 2026-06-06 ​

Changed ​

  • The in-app changelog (click the version number in the sidebar footer) now shows a short, human-readable description for each version instead of a raw list of pull request titles. Available in German and English, matching your UI language setting. Works offline — no internet connection required to view the changelog.

[0.23.4] — 2026-06-05 ​

Fixed ​

  • Switch and subnet detail pages now load correctly when two different sites share the same short name for a device or subnet (e.g. both have a switch called "sw-core"). Previously the page would show a 404 in that situation.

[0.23.3] — 2026-06-05 ​

Fixed ​

  • The one-time upgrade migration from 0.21 could silently discard IP allocations without any log message or warning. The count shown in the startup log is now accurate and reflects what was actually saved. Any rows that could not be imported are listed individually with a reason.

Added ​

  • If your install was affected by the silent-discard bug, a new recovery tool can restore the missing allocations from the original backup automatically. Run it in dry-run mode first to see what would be recovered, then with ?apply=1 to actually restore. Requires admin access.

[0.23.2] — 2026-06-05 ​

Fixed ​

  • Saving changes to a site, switch, or subnet — and deleting them — now works correctly when navigating via the readable URL (e.g. /sites/main-office). Previously these actions returned a "not found" error even though the page itself loaded fine.

[0.23.1] — 2026-06-05 ​

Fixed ​

  • Creating a new subnet, VLAN, or switch from within a site's readable URL (e.g. /sites/main-office/subnets/create) no longer shows a server error. The form now submits correctly.

[0.23.0] — 2026-06-05 ​

Added ​

  • Switches and subnets now have readable URLs, just like sites. You'll see addresses like /sites/main-office/switches/core-01 and /sites/main-office/subnets/management instead of long UUID strings. Old bookmarks redirect automatically.
  • All navigation links, search results, breadcrumbs, and dashboard favorites have been updated to use the new address format.

Fixed ​

  • If you upgraded from 0.21 to 0.22, some URLs may have gotten placeholder-style short names (e.g. saarlan-839425). These are now automatically cleaned up to proper readable names on startup — no manual action needed.
  • Renaming a site, switch, or subnet now correctly updates the URL as expected. A previous edge case caused the old URL to stick if you opened the edit form without changing the name.

[0.22.2] — 2026-06-04 ​

Changed ​

  • Renaming a site, switch, or subnet now also updates its URL. If you rename "Main Office" to "HQ", the URL changes from /sites/main-office to /sites/hq automatically. Old UUID-based bookmarks (the long-ID form) continue to redirect as before.

[0.22.1] — 2026-06-04 ​

Added ​

  • Site URLs are now human-readable: /sites/main-office instead of /sites/2b917665-…. All navigation links have been updated. If you have old bookmarks with UUID-based URLs, they redirect automatically to the new form.
  • API filters for switches, subnets, VLANs, and search now accept either the site name-slug or the UUID — both work.

[0.22.0] — 2026-06-04 ​

Added ​

  • Sites, switches, and subnets now each have a short URL-safe name (slug) generated automatically from their display name. This is the foundation for the readable URLs rolled out in 0.22.1 and 0.23.0. Existing records were migrated automatically.

[0.21.3] — 2026-06-04 ​

Added ​

  • Import, backup restore, and activity-log undo are fully working again. These features were temporarily unavailable after the 0.21 storage upgrade. The Data Management page is back to full functionality.

[0.21.0] — 2026-06-03 ​

Changed ​

  • Data is now stored in a SQLite database instead of JSON files. The switch happens automatically on first startup: existing data is migrated, cross-references are preserved, and the original JSON files are kept as a backup archive. If the migration encounters an error, your JSON files are left untouched so you can restart safely.
  • Deleting a subnet now atomically removes its IP allocations. Concurrent changes no longer risk overwriting each other.

Note: After upgrading, existing bookmarks to specific sites, switches, or subnets will need to be updated once — the internal IDs changed during migration. Names and all other data are unchanged.

[0.20.x and earlier] ​

See GitHub Releases for details on versions before 0.21.

Released under the GPL-3.0 License.

Copyright © 2026 Daniel Neudörfer